Installing a New Travel Motor Doesn’t Have to Be Complicated

When your excavator loses power on one side or shows signs of dragging or leaking, it’s time to replace the travel motor. A smooth installation ensures your machine performs as expected and stays reliable on site. With a quality replacement motor and proper steps, the process becomes safe, simple, and efficient.

First, safety is priority. Park the machine on a solid surface. Turn off the engine. Release any built-up hydraulic pressure. Disconnect the battery. Use support stands to secure the track frame if needed. A stable setup prevents injury and damage.

Next, locate the old travel motor. Remove the track if required. Clean the area around the motor. Take clear photos of hose placement and fittings. This helps during reassembly. Carefully disconnect all hydraulic lines. Cap the hoses to prevent contamination. Then unbolt and remove the old motor. Use lifting equipment to avoid strain or accident.

Before installing the new motor, inspect the sprocket and final drive area. Check for wear, debris, or misalignment. Clean the mounting face. Test-fit the new motor to ensure alignment is correct. Apply anti-seize compound on bolts if needed. Reattach hydraulic lines to their original positions. Tighten bolts evenly in a crisscross pattern for proper sealing.

After mounting, refill the hydraulic oil if needed. Start the machine at low idle. Let oil circulate through the system. Check for leaks. Slowly operate the track in both directions. Listen for strange sounds. Observe motor behavior. Let it run for a few minutes. Recheck all bolts and hoses. Make final adjustments.

Using a quality travel motor makes all the difference. Fulian Machinery offers heavy-duty travel motors that fit a wide range of excavator brands and models. Each motor is tested for pressure, leakage, and performance. Built with hardened gears, reinforced shafts, and reliable seals. Easy to install. Long lifespan. Excellent torque. Ready for tough environments.

Our motors are compatible with brands like CAT, Komatsu, Bobcat, Hitachi, Volvo, and more. We offer full technical support, detailed diagrams, and fast shipping. Fulian products are trusted worldwide by dealers, repair shops, and fleet operators.

Replacing a travel motor is a smart investment. With the right part and proper steps, you restore full machine performance. No delay. No downtime. Just smooth, reliable travel. Fulian helps you do it right from start to finish.

Send us your excavator model. Get a quote today. Our team is ready to support your project and help you choose the best solution.

Fulian Operation Team

2025.5.3